Types of fittings

- Apr 24, 2018 -

There are many kinds of pipe fittings and they are summarized in the following main types:


1. Variable-diameter pipe fittings, which means that the pipe end or a certain part of the pipe has a reduced diameter;


2. Change the thickness of the pipe, means that the wall thickness changes along the length of the pipe;


3. Change the section of the pipe, according to the requirements, the circular section into a square, oval, polygon, etc.;


4. In the case of curved pipe fittings, where we have more contact, we will change the straight pipe into an elbow with different radii of curvature, such as elbows, elbows, cast iron drainage pipes, etc.;


5. With flanges and round flanges, the former refers to the end of the pipe to the inside or outside convex, the latter refers to the formation of bulging or grooved pipe in the circumferential direction of the pipe;


6. Pipes with hem and back cover, increase the total strength of the pipe end to the outer or inner side of the pipe or crimp the end of the pipe;


7. Expanded pipe fittings, according to the requirements of the end of the pipe or a certain part of the formation of various shapes of pipe fittings;

Related Industry Knowledge

Related Products

  • Custom Specialty Weld Non-standard Marine、ship Pipe Fittings
  • Marine Piping Products(45, 90, 180 Deg. Eblows, Tees, Reducers)
  • UNS 32750/ S32205 Super Duplex Steel Slip On Raised Face Flange
  • SABS / SANS 1123 600/3, 1000/3, 1600/3, 2500/3, 4000/3 Carbon Steel Slip-on Flanges
  • BS4504 Circular Flanges for Pipes Valves and Fittings,BS4504 6/3 Flanges
  • Butt Welding Steel ECC Reducer for Oil/gas Industry,Duplex Steel/stainless Steel/copper Nikel Titanium Alloy/alloy Steel DNV/GL,ABS,RINA, LR, CCS